Connecting to the Wireless Router    ( Open Priner friendly page ? )

Unauthorised users will be permanently disconnected.

Search Wireless Internet Connections

Connect to:   Rose and Crown Wireless Network

Current Security Code:     To be determined
                                        (case sensitive - XX characters including X spaces)
Your computer should 'remember' the security code - if the connection fails, contact Kate or Mel for a new code (initially free of charge).

Possible connection problems:
If your computer appears to connect to the wireless network but web access cannot be established, try:
Right Click on the connection icon (taskbar bottom right computer icon) select 'Repair' and await result.  If problems still persist, try:
Start / Run
Enter 'services.msc' and press 'OK'
Select 'Wireless Zero Configuration' (near bottom)
Startup Type: Select 'Automatic'
Service Status: Press 'Start'
Press 'OK' when started & close the 'Services' page.
This procedure MAY be required at each connection session.

Note: WIFI channel changed from 1 (2412MHz) to 11 (2462MHz) 20/04/09
Please inform Mel if this creates any connection problems OR reduces the WIFI signal strength.

Further Notes:
In order to aid security, anyone intending to use the wireless internet connection should notify Mel of their requirements and computer name.  Ideally, it would be appreciated if the computer name is set to desired computer name - see 'Conditions'.
This can be achieved via:
Start / Control Panel / System / Computer Name (tab) - enter boat name,
then Restart your computer.